Heat Shrink PVC Battery Cable Protector - 2 1/2" x 18" - 2:1 Shrink Ratio
Status: Available
SKU:
HSPVC18-G
$30.00
2.5" Heat Shrink forms over SB350 connector and cable.
Protects cables and connector from damage.
Allows personnel to separate connectors safely when pulling from the cables.
Prevents damage to cables when pinched by hood.
-2.5" / 2:1 Shrink Ratio / 18"
- Step 1: Cut heat shrink to desired length
- Step 2: Fit heat shrink over connector & cable
- Step 3: Apply heat gun to heat shrink
- Step 4: While still warm, place back into connector so heat shrink will cool to desired shape
Write Your Own Review
2.5" Heat Shrink forms over SB350 connector and cable.
Protects cables and connector from damage.
Allows personnel to separate connectors safely when pulling from the cables.
Prevents damage to cables when pinched by hood.
-2.5" / 2:1 Shrink Ratio / 18"
- Step 1: Cut heat shrink to desired length
- Step 2: Fit heat shrink over connector & cable
- Step 3: Apply heat gun to heat shrink
- Step 4: While still warm, place back into connector so heat shrink will cool to desired shape
| Length | 10"L |
|---|---|
| Additional Spec | 2:1 Shrink Ratio |
| Weight | 5.0 |
